Review: Sovtek 12AX7WA

 I have a love and hate relationship with Russian tubes.  Some of them - like the ECC99 - rival some of the best vintage American and European tubes, while others, like much of the Electro-Harmonix line sounds like solid-state in a bottle.  Yes these tubes can be transparent but they are often lacking in detail or suffer from an aggressive treble and upper midrange.

The early Russian tubes, that first were available in the 1990s to the Western World, were godsend to the tube-o-phile community.  They were cheap and rugged.  An example of this is the 5881WXT which could take the current hungry bias of the Harmon-Kardon Citation V.  Even a RCA blackplate of the era would start to glow on the seams.  But not these Russian mil-spec tubes.

It's been my belief - shared by some friends too - that Russian tubes have good metallurgy but not the best cathode chemistry.  Yes they are rugged, but many of them have the already mentioned issues with the higher frequencies.

As for the Sovtek 12AX7WA, it has a pair of very small coated plates and what I would call a primitive looking spacer that should be made out of mica.  The pins ends are sharp but overall construction looks quite good.  I plugged it into my Frankenstein EICO ST70, which provides the initial gain before the 6SN7 phase-splitter.

The Sound:  Initially I was surprised how much I like the Sovtek.  The sound was very transparent and, at first listen, very modern sounding.  I was reminded of a really good JFET preamplifier or MOSFET amplifier - big, dynamic and smooth.  But, like the aforementioned solid-state gear, lacking in inner detail.  The soundstage was also smeared a bit, removing the space around individual instruments and the big front-to-back sound of a vintage Mullard.  Dynamics in the upper part of the spectrum became a little rough/forced sounding with the Sovtek.

What I'm really finding - at least so far - is that modern tubes often has a good tonal presentation but lack in inner detail and making a big soundstage.  I'm curious to the reason why this is true.  Is this linearity or an artificial presentation brought on by - an unknown variable?  We shall have to continue and have some vintage comparisons.  More later!

Review: Rega Planar 8 turntable

 

I've owned a half-dozen turntables in my time.  Starting with an old Technics direct driver with a p-mount cartridge and working through two VPIs, a long running Dual CS5000, and two Thorens of varying vintages.  Except for some experimentation with the Denon DL-103R MC, it has mostly been MM cartridges of different expenses.  I thought, for example that the Thorens TD309 and Ortofon Bronze cartridge was very good - especially for the price - combination.

Well the past few months living with a new Rega RP8 and Ania Pro MC cartridge has been a real eye-opener.  Gone is the fuzziness and opaqueness of the MM sound, replaced by more detail and a bigger soundstage.  The experience has changed my mind about the moving magnet.  Though the Rega Ania Pro MC needs a step-up transformer  - in my case Cinemag 1254s - the speed and transparency has brought everything up to a much higher level of refinement.

Since there are already several reviews of the 'table I will keep it short.

The biggest surprise with the Rega combination is the bass and dynamics.  It was always my belief that a "real" turntable required a gagillion pound platter and base.  Instead the RP8 is decidedly unimpressive - at least visually - compared to something like a VPI Aries.  How did Rega do it?  I have no idea about the mechanical engineering behind this table, but, to my ears, is just works.  Perhaps it is the turntable acting as a whole system with a cartridge, arm, and everything else like the included speed controller working together.

Soundstaging, like on several original Dead Can Dance LPs, is superlative.  We are talking a rounded arc left-to-right that goes beyond the edges of the speaker, along with exceptional depth.  The coloration and clarity of something like Lonnie Liston Smith's Visions of a New World comes through much better than my now-departed Thorens TD309/Ortofon 2M Bronze.  This is also a big sound turntable with excellent resolution and separation of instruments; exceeding any front end I've ever had before.

Yes the Rega RP8 is much more expensive than my previous turntable but, at least in this case, the cost was worth the sonic upgrade.  Not only does my whole system sound that much better, but everything from the preamp to the amplifier and even the speakers sound way better than their price point. 

Very, very recommended.

System:

• Audio Research SP8
• modified Eico ST70 with 6AR6 tubes
• Cardas Neutral Reference interconnects
• KEF R500 speakers with Mogami stranded wiring
  
• Dual CS5000 turntable with an Ortofon OM20 cart, aftermarket Shibata Stylus